| D4.2_prot |
Description of the LocON protocols |
Deliverable D4.2 deals with all matters concerning communication of LocON-aware devices with the LocON framework. This includes the incorporation of the TCP/IP protocol as a fully transparent transport protocol. The report describes the data stream between the components and its structure, as well as data packet composition, available packet types, and packet validation.
» more
|
| D4.2_sec |
Concept of security mechanisms in LocON systems |
Typical LocON applications are security, safety and tracking. These applications require confidence in the obtained positions, safe and secure transmission and secure authentication of the RTLS present. This document is a proposal for LocON protocol security mechanisms.
» more
|
| D5.4 |
Coexistence analysis of the subsystems at radio signal level |
This report will expose the theoretical analysis processes as input to the spectrum measurements that result, e.g. in the detection of mutual interference effects, output power deteriorations, etc … Various possible configurations ar etaken into account for different radio environments (indoor, outdoor) and installations.
» more
|
| D4.1 |
Classification of Localisation Technology and general description of the LocON ambient aware data stream and protocol |
The goal of this deliverable is twofold.
Firstly, generic classification criteria for localisation systems are defined in order to allow identification of common and specific parameters of individual classification groups.
The second part of the deliverable addresses the concept of the inter-operable layer which has to handle with the specific parameters of each location technology on one side and with the common parameters of the LocON middleware on the other side.
» more
|
| D1.2 |
LocON Platform Requirement |
In this document the technical requirements on the LocON platform from the technology providers’ perspectives will be set up.
» more
|
| D3.1 |
Schematic overview of the LocON framework and guidelines for environmental requirements |
This deliverable contains the architecture and the design of the LocON platform. This ranges form the high-level description to the interfaces, as well towards the interfaces as to the upper layers (application layer)
» more
|
| D1.3 |
Requirement Draft for the Global LocON standard |
This deliverable makes the synthesis of the requirements from end-users' and from technology providers' sides. It concludes the specification phase setting the baseline for the new protocol and data stream layer enabling interoperability for embedded localisation network and service infrastructures.
» more
|
| D4.5 |
Identification and roadmap of the standardisation activities |
The deliverable describes the standardization activities in the LocON project within the phases of analyzing, tracking, planning and introducing own activities to boards or organisations.
» more
|
| D5.1 |
Concept of High Level Sensor Fusion |
The deliverable summarises the outcome of the research into the high level sensor fusion, especially, in the respect of location processing and quality of location.
» more
|
| D5.2 |
Adaptive Matrix for Determination of the Quality of Location and Benchmarking |
This deliverable summarises the research and experiments performed as a part of the development of the adaptive matrix for determination of the quality of positioning including benchmarking of localisation subsystem data and localisation engine performance.
» more
|